BPH PUMPS
815-578-0100
  • PUMPS
    • BJM SUBMERSIBLE PUMPS >
      • BJM Pump News
      • BJM Parts
      • BJM JX Pumps
      • BJM SX Pumps
      • BJM RX Pump
      • BJM J Pump
      • BJM S Pump
      • BJM SV Pump
      • BJM R Pump
      • BJM BABY Pump
      • BJM LWA Pump
      • BJM KB Pump
      • BJM KDH Pump
      • BJM KZN Pump
      • BJM KZE Pump
      • BJM XP-KZN Pump
      • BJM XP-SK Pump
      • BJM XP-SKX Pump
      • BJM SKX Pump
      • BJM HAZ Pump
      • BJM XP-SKG Pump
      • BJM XP-JX Pump
      • BJM SKG Pump
    • YAMADA DIAPHRAGM PUMPS >
      • Yamada Pump Parts
      • YAMADA Diaphragm Pumps >
        • Diaphragm Pumps DP-10
      • Yamada Grease Pumps
      • Yamada Iwaki Cross Referance
      • Yamada News
    • CAT HIGH PRESSURE PUMPS >
      • CAT Pumps News
    • AMPCO POSITIVE DISPLACEMENT PUMPS >
      • AMCO AC
      • LC LD Pumps
      • AMPCO Pump News
    • IWAKI MAGNETIC DRIVE PUMPS >
      • IWAKI News
      • IWAKI DP
      • IWAKI KB
      • IWAKI SP
      • IWAKI PARTS
      • IWAKI MD
      • IWAKI WMD
      • IWAKI MX
      • IWAKI MXF
      • IWAKI MXP
      • IWAKI SMF
      • IWAKI SMX
    • LUTZ PUMPS >
      • LUTZ Pump News
    • FLUX BARREL PUMPS >
      • FLUX Pump News
    • OBERDORFER FLOW PUMPS >
      • OBERDORFER BRONZE GEAR PUMPS
      • OBERDORFER CHEMSTEEL
      • OBERDORFER News
    • JABSCO XYLEM MARINE PUMPS >
      • JABSCO News
    • HAYWARD COMMERCIAL PUMPS >
      • Hayward heavy-duty D S Vertical Pumps
      • HAYWARD TBH Ball Valves
    • MURZAN SANITARY PUMPS
    • STORE
  • TYPES
  • SANITARY
  • SERVICE
  • PARTS
  • APPLICATIONS
  • CONTACT
    • About Us
    • TERMS
    • Privacy Policy
    • Systems Integration

BJM Submersible Pumps

BJM Pumps® is headquartered in Old Saybrook, CT and has been serving the industry since 1983. BJM Pumps has grown quickly by supplying quality pumps at a modest price.  BJM Pumps serves many different industries through two separate divisions:Submersible Pumps: municipal, chemical, construction, sewage, mining and process industries.

CLICK HERE TO SEE PUMP CURVES

BJM Submersible Pumps

Picture
SUBMERSIBLE PUMPS - From 1/6th HP to 30HP. Each designed for one or more applications. Models available include: Slim Line Top Discharge De-Watering pumps; Vortex, Single/Double Vane impeller pumps; Shredder pumps, Grinder pumps for effluent, sewage and industrial waste; Heavy Duty sand, sludge & slurry pumps with agitator for agricultural waste & mining applications. Pumps are available in various materials such as: 316 CAST Stainless Steel, Noryl, Titanium and Cast Iron. All pumps above 1/2 HP have double mechanical seals and electrical overloads to protect the motor. Most product improvements come about from input from BJM customers. The manufacturing facilities where our pumps are assembled are all ISO 9001. Customer satisfaction and product improvement is a continuous commitment. 

Sand, Sludge & Slurry Pumps

Picture
Made from high quality steel materials and featuring heavy duty wear resistant impellers, these submersible pumps are designed to tackle the toughest conditions. BJM Slurry pump - The perfect solution for sand, sludge, and slurry removal.

Corrosion Resistant Pumps

Picture
All exposed parts to pumped liquids made of 316 Stainless Steel, Noryl or Titanium. Chemical & Corrosion Resistant Pumps are ideal for pumping everything from contaminated, dirty water to corrosive liquids. 

Explosion Proof Shredder Pumps

Picture
XP-SK Series: New Product Line from BJM Pumps®
Explosion Proof Electric Submersible Pumps with Shredder Action Impellers for use in Class 1, Division 1, Groups C & D Hazardous Locations


High Temperature Pumps

Picture
Some applications require special pumps requiring handling liquids up to 200 degrees F. This is where the BJM   pumps come in to play. BJM’s high temperature submersible pumps are available for hot temperature dewatering, waste water pumping, sump dewatering, solids handling and slurry applications. 

Solids Handling Pumps

Picture
BJM Pumps® solids handling pumps offer long life and trouble free performance. Cutter pumps, Shredder pumps, Vortex pumps, Grinder pumps - BJM pumps has a pump for your application - everything from industrial, domestic, agricultural, to municipal applications. 

Dewatering Pumps

Picture
Dewatering Pumps, Waste-Water Pumps and Sump Pumps. BJM offers the perfect solution to efficient waste-water pumping, construction site dewatering, effluent dewatering and more. BJM Pumps® provide top performance and excellent quality for a modest investment. 
    Max file size: 20MB
Submit


Submersible agitator pump LWA55H-460T

$0.00
Description: Light weight agitator pump 7.5HP, 460V, 3PH, 3450RPM

Recommended accessories:
Manual Starter Box:
  • Manual On/Off starter box for LWA55H-230 = BJM Item # 201145
  • Manual On/Off starter box for LWA55H-460 = BJM Item # 201125
  • Manual On/Off starter box for LWA55H-575 = BJM Item # 201125 
Auto Starter Box:
  • Auto On/Off starter box for LWA55H-230 = BJM Item # 201146
  • Auto On/Off starter box for LWA55H-460 = BJM Item # 201126
  • Auto On/Off starter box for LWA55H-575 = BJM Item # 201126 
Simplex Control Panel - (3 mechanical float switches):
  • Three Phase control Panel for LWA55H-230 = BJM Item # 201077
  • Three Phase control Panel for LWA55H-460 = BJM Item # 201085
  • Three Phase control Panel for LWA55H-575 = BJM Item # 201084 
Duplex Control Panel - (4 mechanical float switches):
  • Three Phase control Panel for LWA55H-230 = BJM Item # 201088
  • Three Phase control Panel for LWA55H-460 = BJM Item # 201096
  • Three Phase control Panel for LWA55H-575 = BJM Item # 201095 
Shop

BJM Submersible Pump KB55H-460T

$0.00
Heavy Duty Dewatering / Light Slurry Agitator Pumps. A great solution for dewatering settling basins, retention ponds, wash sumps or any pump job with tough silt, sand or coal fines. The KB-Series offer top discharge performance and excellent quality for a very modest investment. 

KB Series Submersible offers Heavy Duty Dewatering & capabilities for Light Slurry Applications:  Settling Basins • Retention Ponds • Wash down sumps • Sand & gravel dewatering • Barge & tank cleanout    KB Series Submersible pumps feature…
  1. Abrasive resistant chrome iron components;
    • Agitator - to fluidize settled solids into suspension.
    • Wear plate - replaceable hardened surface on the suction side where erosion would cause a loss of pump performance.
    • Semi- open Impeller - to handle some solids.
  2. EVERY KB pump model is protected by;
    • Class H motor insulation - and built in amperage ( FLA ) and temperature overload protection.
    • Double mechanical seals – SiC/SiC lower & Carbon Ceramic upper in a separate oil filled seal chamber.
    • Heavy Duty Lip Seal – additional protection for the mechanical seals.
    • Stainless steel shaft and shaft sleeve – saves on shaft wear due to abrasives and corrosion.
  3. The KB Series are top discharge pumps;
    • KB pumps are utility pumps - frequently dragged from one site to another. The KB doesn’t have a side discharge connection that can break off or be damaged as it is pulled and pushed into place.
    • Top discharge pumps are cooled by pumped liquid - The KB pumps can pump a sump or pit down to within "inches" of the bottom. A side discharge pump without a cooling jacket must stay submerged to avoid overheating, leaving as much as 3 feet of un-pumped slurry.
    • Top discharge means "SLIM" - even the largest model with a 13.5 inch "waistline" will fit down a manhole with a hose attached.   High-Chrome Agitator helps keep solids suspended in liquid and helps prevent pump from clogging.  
High-Chrome Agitator helps keep solids suspended in liquid and helps prevent pump from clogging.
(Specifications dependent on model & may change without notice)
   
For product brochure, operational manual or dimensions please go to Product Information & Literature
Shop

BJM PUMP GF32-9 304SS 201151

$1,130.00 $892.70
BJM GF32-9 Perfecta Submersible Slurry Pump Ideal for pumping everything from contaminated, dirty water, corrosive liquids to light dewatering. Used in the following U.S. industries: Metal Plating, Salt Mining, Plumbing, Marine, Agriculture, Aquaculture, Chemical, Rental, Utilities and Fire Departments.

The Perfecta® Pump for corrosive environments
Made of super tough Noryl material, 304SS shaft & 316SS fasteners, Buna (Nitrile) elastomers.
NL = manual operation.
Not for use in flammable liquids! Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump. Note: Seal Minder® option not available on the Perfecta® Pump-Series pumps.
(Specifications dependent on model & may change without notice)
Download Data Sheet & Performance Curve

​Ideal for pumping everything from contaminated, dirty water, corrosive liquids to light dewatering.
Used in the following U.S. industries: 
Metal Plating, Salt Mining, Plumbing, Marine, Agriculture, Aquaculture, Chemical, Rental, Utilities and Fire Departments.
  • Virtually unbreakable
  • Compact and lightweight. Only 13.5 Lbs.
  • Never rusts. Excellent resistance against acids, alkalis.
  • Two discharge ports. 1 1/4" inside threaded connection and one 1 1/2" tapered hose connection delivered with each pump.
  • Thermal breaker incorporated in motor windings shuts off power before over-heating occurs due to locked rotor or long periods of running dry (150°C). For permanent installation temperature should not to exceed 135°F. For intermittent use submerge less than 20 min. in 195°F maximum.
The GF32-9 and IGF32-9 comes equipped with a fully automatic on/off level switch as standard. The pump is easily installed in a sump. The Perfecta® Pump for safeguarding vaults, emptying tanks or pumping out ponds. The unique dual port design virtually eliminates kinks in your hose; use vertical port for deep/narrow places or use the horizontal port for shallow/wide applications.
Not for use in flammable liquids! Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump. Note: Seal Minder® option not available on the Perfecta® Pump Series pumps.
(Specifications dependent on model & may change without notice)
For product brochure, operational manual or dimensions please go to Product Information & Literature
​




Shop

BJM PUMP GF32-9NL 304SS 201150

$1,070.00 $845.30
BJM GF32-9NL Perfecta Submersible Slurry Pump Ideal for pumping everything from contaminated, dirty water, corrosive liquids to light dewatering. Used in the following U.S. industries: Metal Plating, Salt Mining, Plumbing, Marine, Agriculture, Aquaculture, Chemical, Rental, Utilities and Fire Departments.

The Perfecta® Pump for corrosive environments
Made of super tough Noryl material, 304SS shaft & 316SS fasteners, Buna (Nitrile) elastomers.Comes with built in automatic float.
Not for use in flammable liquids! Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump. Note: Seal Minder® option not available on the Perfecta® Pump-Series pumps. (Specifications dependent on model & may change without notice)

Download Data Sheet & Performance Curve
​

Ideal for pumping everything from contaminated, dirty water, corrosive liquids to light dewatering.
Used in the following U.S. industries: 
Metal Plating, Salt Mining, Plumbing, Marine, Agriculture, Aquaculture, Chemical, Rental, Utilities and Fire Departments.
  • Virtually unbreakable
  • Compact and lightweight. Only 13.5 Lbs.
  • Never rusts. Excellent resistance against acids, alkalis.
  • Two discharge ports. 1 1/4" inside threaded connection and one 1 1/2" tapered hose connection delivered with each pump.
  • Thermal breaker incorporated in motor windings shuts off power before over-heating occurs due to locked rotor or long periods of running dry (150°C). For permanent installation temperature should not to exceed 135°F. For intermittent use submerge less than 20 min. in 195°F maximum.
The GF32-9 and IGF32-9 comes equipped with a fully automatic on/off level switch as standard. The pump is easily installed in a sump. The Perfecta® Pump for safeguarding vaults, emptying tanks or pumping out ponds. The unique dual port design virtually eliminates kinks in your hose; use vertical port for deep/narrow places or use the horizontal port for shallow/wide applications.
Not for use in flammable liquids! Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump.Note: Seal Minder® option not available on the Perfecta® Pump Series pumps.
(Specifications dependent on model & may change without notice)
For product brochure, operational manual or dimensions please go to Product Information & Literature

Shop

BJM PUMP IGF32-9NL 201154

$1,290.00 $1,019.10
BJM IGF32-9NL Perfecta Submersible Slurry Pump Ideal for pumping everything from contaminated, dirty water, corrosive liquids to light dewatering. Used in the following U.S. industries: Metal Plating, Salt Mining, Plumbing, Marine, Agriculture, Aquaculture, Chemical, Rental, Utilities and Fire Departments.

The Perfecta® Pump for corrosive environments
Made of super tough Noryl material, 316SS shaft & fasteners, FKM elastomers and an EPDM power cord.
NL = manual operation.
Not for use in flammable liquids! Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump.
Note: Seal Minder® option not available on the Perfecta® Pump-Series pumps.(Specifications dependent on model & may change without notice)
Download Data Sheet & Performance Curve

Ideal for pumping everything from contaminated, dirty water, corrosive liquids to light dewatering.
Used in the following U.S. industries: 
Metal Plating, Salt Mining, Plumbing, Marine, Agriculture, Aquaculture, Chemical, Rental, Utilities and Fire Departments.
  • Virtually unbreakable
  • Compact and lightweight. Only 13.5 Lbs.
  • Never rusts. Excellent resistance against acids, alkalis.
  • Two discharge ports. 1 1/4" inside threaded connection and one 1 1/2" tapered hose connection delivered with each pump.
  • Thermal breaker incorporated in motor windings shuts off power before over-heating occurs due to locked rotor or long periods of running dry (150°C). For permanent installation temperature should not to exceed 135°F. For intermittent use submerge less than 20 min. in 195°F maximum.
The GF32-9 and IGF32-9 comes equipped with a fully automatic on/off level switch as standard. The pump is easily installed in a sump. The Perfecta® Pump for safeguarding vaults, emptying tanks or pumping out ponds. The unique dual port design virtually eliminates kinks in your hose; use vertical port for deep/narrow places or use the horizontal port for shallow/wide applications.
Not for use in flammable liquids! Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump.Note: Seal Minder® option not available on the Perfecta® Pump Series pumps.
(Specifications dependent on model & may change without notice)

For product brochure, operational manual or dimensions please go to Product Information & Literature
Shop

BJM PUMP IGF32-9 201153

$1,360.00 $1,074.40
BJM IGF32-9 Perfecta Submersible Slurry Pump Ideal for pumping everything from contaminated, dirty water, corrosive liquids to light dewatering. Used in the following U.S. industries: Metal Plating, Salt Mining, Plumbing, Marine, Agriculture, Aquaculture, Chemical, Rental, Utilities and Fire Departments.

The Perfecta® Pump for corrosive environments
Made of super tough Noryl material, 316SS shaft & fasteners, FKM elastomers.
Comes with built in automatic float.
Not for use in flammable liquids! Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump.
Note: Seal Minder® option not available on the Perfecta® Pump-Series pumps.(Specifications dependent on model & may change without notice)

Download Data Sheet & Performance Curve

Perfecta SeriesIdeal for pumping everything from contaminated, dirty water, corrosive liquids to light dewatering.
Used in the following U.S. industries: 
Metal Plating, Salt Mining, Plumbing, Marine, Agriculture, Aquaculture, Chemical, Rental, Utilities and Fire Departments.
  • Virtually unbreakable
  • Compact and lightweight. Only 13.5 Lbs.
  • Never rusts. Excellent resistance against acids, alkalis.
  • Two discharge ports. 1 1/4" inside threaded connection and one 1 1/2" tapered hose connection delivered with each pump.
  • Thermal breaker incorporated in motor windings shuts off power before over-heating occurs due to locked rotor or long periods of running dry (150°C). For permanent installation temperature should not to exceed 135°F. For intermittent use submerge less than 20 min. in 195°F maximum.
The GF32-9 and IGF32-9 comes equipped with a fully automatic on/off level switch as standard. The pump is easily installed in a sump. The Perfecta® Pump for safeguarding vaults, emptying tanks or pumping out ponds. The unique dual port design virtually eliminates kinks in your hose; use vertical port for deep/narrow places or use the horizontal port for shallow/wide applications.
Not for use in flammable liquids! Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump.Note: Seal Minder® option not available on the Perfecta® Pump Series pumps.
(Specifications dependent on model & may change without notice)
For product brochure, operational manual or dimensions please go to Product Information & Literature
Perfecta SeriesIdeal for pumping everything from contaminated, dirty water, corrosive liquids to light dewatering.
Used in the following U.S. industries: 
Metal Plating, Salt Mining, Plumbing, Marine, Agriculture, Aquaculture, Chemical, Rental, Utilities and Fire Departments.
  • Virtually unbreakable
  • Compact and lightweight. Only 13.5 Lbs.
  • Never rusts. Excellent resistance against acids, alkalis.
  • Two discharge ports. 1 1/4" inside threaded connection and one 1 1/2" tapered hose connection delivered with each pump.
  • Thermal breaker incorporated in motor windings shuts off power before over-heating occurs due to locked rotor or long periods of running dry (150°C). For permanent installation temperature should not to exceed 135°F. For intermittent use submerge less than 20 min. in 195°F maximum.
The GF32-9 and IGF32-9 comes equipped with a fully automatic on/off level switch as standard. The pump is easily installed in a sump. The Perfecta® Pump for safeguarding vaults, emptying tanks or pumping out ponds. The unique dual port design virtually eliminates kinks in your hose; use vertical port for deep/narrow places or use the horizontal port for shallow/wide applications.
Not for use in flammable liquids! Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump. Note: Seal Minder® option not available on the Perfecta® Pump Series pumps.
(Specifications dependent on model & may change without notice)
​
For product brochure, operational manual or dimensions please go to Product Information & Literature
Shop

BJM PUMP KZN-110 CALL FOR PRICING

$0.00
BJM Pump Heavy Duty KZN 110 Submersible Slurry with agitator KZN Heavy Duty Submersible Slurry Pumps with agitator is the choice of industries that face the most difficult pumping: Lime slurries Mill scale Coal runoff sumps Wash down sumps Ash transfer Tailings ponds Slag pits Food wastes Silt removal Sand & gravel dewatering Barge & tank cleanout
Shop

BJM PUMP KZN-110H CALL FOR PRICING

$0.00
BJM Pump Heavy Duty KZN 110H Submersible Slurry with agitator KZN Heavy Duty Submersible Slurry Pumps with agitator is the choice of industries that face the most difficult pumping: Lime slurries Mill scale Coal runoff sumps Wash down sumps Ash transfer Tailings ponds Slag pits Food wastes Silt removal Sand & gravel dewatering Barge & tank cleanout
Shop

BJM PUMP KZN-150 CALL FOR PRICING

$0.00
BJM Pump Heavy Duty KZN 150 Submersible Slurrywith agitator KZN Heavy Duty Submersible Slurry Pumps with agitator is the choice of industries that face the most difficult pumping: Lime slurries Mill scale Coal runoff sumps Wash down sumps Ash transfer Tailings ponds Slag pits Food wastes Silt removal Sand & gravel dewatering Barge & tank cleanout
Shop

BJM PUMP KZN-150L CALL FOR PRICING

$0.00
BJM Pump Heavy Duty KZN 150L Submersible Slurry with agitator KZN Heavy Duty Submersible Slurry Pumps with agitator is the choice of industries that face the most difficult pumping: Lime slurries Mill scale Coal runoff sumps Wash down sumps Ash transfer Tailings ponds Slag pits Food wastes Silt removal Sand & gravel dewatering Barge & tank cleanout
Shop

BJM PUMP KZN-220L CALL FOR PRICING

$0.00
BJM Pump Heavy Duty KZN 220L Submersible Slurry with agitator KZN Heavy Duty Submersible Slurry Pumps with agitator is the choice of industries that face the most difficult pumping: Lime slurries Mill scale Coal runoff sumps Wash down sumps Ash transfer Tailings ponds Slag pits Food wastes Silt removal Sand & gravel dewatering Barge & tank cleanout
Shop

BJM PUMP KZN-37 CALL FOR PRICING

$0.00
BJM Pump Heavy Duty KZN 37 Submersible Slurry with Agitator KZN Heavy Duty Submersible Slurry Pumps with agitator is the choice of industries that face the most difficult pumping: Lime slurries Mill scale Coal runoff sumps Wash down sumps Ash transfer Tailings ponds Slag pits Food wastes Silt removal Sand & gravel dewatering Barge & tank cleanout
Shop
1 2 3

Company Info 
BPH Pump & Equipment, Inc.
4126 W. Orleans St. 
McHenry, IL 60050
T 815-578-0100 |  
F 815-578-0400
Toll Free (888) 289-8787
Contact Us
Services
About Us
Services
Systems
Applications
Pump News
Hose, Ducts & Couplings
By Brand
SPX PUMPS
PRICE PUMPS
LUTZ PUMPS
BERKLEY Pumps
NOVA FLEX Hoses
FINISH THOMPSON
By Brand
JABSCO 
OBERDORFER
HAYWARD 
MURZAN 
POWER FLOW 
FLUID-O-TECH 
Featured Pumps
YAMADA Pumps
CAT Pumps
AMPCO PUMPS
IWAKI Pumps
BJM Pumps


Orders:

Picture
You will be directed to Paypal to complete your purchase
Sanitary Pumps:
Picture
Picture
Picture
Picture
Picture